Search results for: 'steel slab injector been band to'

HomeGuard TMB provides total termite protection for the building under slab and contains 1g/kg Bifenthrin.

Go-Plugs in 13mm diameter are small plastic plugs that offer a fast, efficient, and professional solution for sealing drill holes during termite treatment and other applications. Traditionally, plugging drill holes required wadding and concrete mortar, which can be time-consuming and difficult to match with existing surfaces.

TERM-seal Ura-Fen Shield TWB is termite and waterproofing barrier for all building situations. It is a triple layer sheet barrier used to form a continuous moisture proof and termite resistant barrier around the cavity perimeter and construction joints of new slab-on-ground structures. Use as a termite/damp-coarse barrier combination for installation across cavities, or as a termite/vapour barrier combination for full under-slab installation.

Homeguard Termiflex Termiticidal Adhesive and Sealant is a unique sealant / builder's adhesive that has been impregnated with Biflex. Use Homeguard Termiflex to hold Homeguard sheets in place until other building elements are installed, by fastening joints and corners corners and holding the sheet to bricks, blocks, concrete and other buliding materials in the gaps between nails and other similar fastening devices.

Maximise your termite protection with the cutting-edge Termidor High Pressure Device (HPD). The Termidor High Pressure Device is specifically designed to be used for applications of Termidor HE by allowing for hole spacings of up to 600mm, ensuring the same unparalleled coverage with fewer drill points.

Developed in collaboration with BASF, the Termidor High Pressure Device operates at a minimum pressure of 800psi, harnessing the power of Termidor HE's patented Advanced Polymer Technology™. This synergy between Termidor HE and the high-pressure device offers pest control professionals a revolutionary way to apply termite treatments, reducing the number of holes needed and minimising disruption to structures.

Standard sized bird posts for bird wire systems to protect against pigeons. Wire is suspended between bird wire posts to prevent large birds from landing. These bird posts are designed to be inserted into Stick-on bases. Use these posts when multiple rows of bird wire is needed.

Larger sized bird posts for bird wire systems to protect against pigeons. Wire is suspended between bird wire posts to prevent large birds from landing. These bird posts are designed to be installed by knocking them into Anchor Rivets. Use these posts when multiple rows of bird wire is needed.

A discreet intermediate fixing that can be used for screwing into timber or masonry. Ideal for installing and erecting bird netting.

Angle Brackets are Intermediate Fixings for Cladding, masonry or metal and are fixed in position using Self Drill Screws or Self Tap Screws. 

Kordon TMB is a complete underslab barrier, providing both termite and moisture protection.

Bird wire Standard Spring is to be used for tensioning bird wire on the post and bird wire system.  Standard Springs are installed at one end of each run of bird post and wire.

Hog rings are used to attach bird netting to the net cable. Hog rings can also used to join net seams and secure zips into the net.