Search results for: 'seal steel injector body boards to'
- Pro Angle Bracket - Stainless Steel (PK100)
Angle Brackets are Intermediate Fixings for Cladding, masonry or metal and are fixed in position using Self Drill Screws or Self Tap Screws.
- Hog Ring Staples - Stainless Steel (PK2500)
Hog rings are used to attach bird netting to the net cable. Hog rings can also used to join net seams and secure zips into the net.
- Split Pins Stainless Steel 25mm (PK100)
Split pins are a discrete fixing that need to be inserted in a horizontally fitted anchor rivet. Once horizontally fitted attach the bird wire spring to the split pin. These Split Pins can also be used as an intermediate net fixing.
- Bird Post Stainless Steel 120mm x 4mm (PK100)
Standard sized bird posts for bird wire systems to protect against pigeons. Wire is suspended between bird wire posts to prevent large birds from landing. Install these bird posts by knocking them into Anchor Rivets. These posts need to be positioned at 1.5m intervals along the ledge. These posts are used for the lead. These posts will be supplied in packs of 100.
- Termidor High Pressure Device
Only for use with Termidor HE
Maximise your termite protection with the cutting-edge Termidor High Pressure Device (HPD). The Termidor High Pressure Device is specifically designed to be used for applications of Termidor HE by allowing for hole spacings of up to 600mm, ensuring the same unparalleled coverage with fewer drill points.
Developed in collaboration with BASF, the Termidor High Pressure Device operates at a minimum pressure of 800psi, harnessing the power of Termidor HE's patented Advanced Polymer Technology™. This synergy between Termidor HE and the high-pressure device offers pest control professionals a revolutionary way to apply termite treatments, reducing the number of holes needed and minimising disruption to structures.
- Airco MOD.81 Pneumatic Hog Ring Stapler
Pneumatic Hog Ring stapler ideal for larger jobs when an air compressor is available.
- 3M UniSafe Peltor Neck Band Earmuff H7B 290
The 3M UniSafe Peltor Neck Band Earmuffs H7B 290 has been developed for demanding noisy environments with increased low frequency attenuation
- TeeJet Adjustable Conejet Spray Nozzle Tip
The TeeJet Adjustable Conejet Spray Nozzle Tip is available in a range of sizes and adapts to many spray lances and TeeJet Gunjets. The nozzle tip design makes it well-suited for use on demanding applications including backpack sprayers.
- Raxit Aluminum Profile Shielding Strip 1m
For use with Raxit seals
An aluminium profile shielding strip 1m in length, designed for use with the Raxit Door Seals and rodent-proofing systems. Raxit Seals eliminate the risks of rodents and pests passing through the gaps of doors.
- BirdWire Micro Spring (PK100)
Bird wire Micro Spring is to be used for tensioning bird wire on the post and bird wire system. Micro Springs are installed at one end of each run of bird post and wire.
- Homeguard Protectacote Primer 5L
Prepare surface with Protectacote Primer
HomeGuard Protectacote Primer is designed to be applied before HomeGuard Protectacote. Apply a single coat of the primer to run of masonry, concrete or fibre board prior to applying HomeGuard Protectacote Termite and Waterproof Barrier. All surfaces must be clean and free of grease and dirt before application.
- Trapper MC Mouse and Insect Glue Trap (Pack of 48)
Glueboard for mice and insects to suit Protector Pest Monitor Station and Trapper multi-catch mouse trap. 165mm x 100mm.