- Concrete Seals / Plugs 6-11mm (Pack of 500)
Concrete seals will plug drill holes in concrete and are made from plastic soft enough to conform to irregular surfaces, but hard enough to hold firmly. Available in a range of colors and sizes to suit your application.
- Concrete Seals / Plugs 12-14mm (Pack of 500)
Concrete seals will plug drill holes in concrete and are made from plastic soft enough to conform to irregular surfaces, but hard enough to hold firmly. Available in a range of colors and sizes to suit your application.
- Masonry Drill Bit SDS
High quality masonry drill bits of various diameter and length to suit your application.
- GFS 1000 Concrete & Steel TRAK Nailing Gun
GFS1000 Concrete & Steel TRAK nailing gun is ideal for installing termite barriers during pre-construction, smooth edge, electrical & data clips, channel & track, steel stud to block and concrete walls, and timber battens to concrete and block walls.
- Tapered Cork 18 x 11/8mm (Pack of 1000)
A pack of 1000 tapered corks with each cork measuring 18 x 11/8mm. Each cork is made from a single piece of natural cork.
- GFS Magnetic Adaptor for Nail Gun
Magnetic adaptor designed for use with the GFS Gas Actuated Concrete or Steel Nail Gun
- GFS Magnetic Steel Washers for Nail Gun
A pack of 500 Magnetic Washes designed for use with the GFS 1000 Concrete & Steel Trak Nail Gun
- Makita Nemesis 2 Masonry Drill Bit (SDS 4-Cutter)
The Makita Nemesis 2 Masonry Drill bit with 4-cutter geometry is a premium drill bit with a full carbide head for improved durability and dust removal. Available in a range of lengths and diameters.
- Notice for 'New Construction - Termite Management System' (Pack of 10)
Pack of 10 Notices
A templated sign and notice record for the installation of a Termite Management System during for new construction.
- Notice for 'Existing Construction - Termite Management System' (Pack of 10)
Pack of 10 Notices
A templated sign and notice record for the installation of a Termite Management System in an existing structure (post-construction).
- Multi Facet Donger Termite Inspection Tool
Fixed length
The Multi Facet Donger (MFD) is a tool used in termite and building inspections and produces a change in tone when damage or anomalies are present. This donger has been designed to reduce the risk of missing timber damage by providing greater surface contact and covering substantially more surface area than conventional tools.
- Multi Facet Donger with Telescopic Shaft Termite Inspection Tool
Extendable telescopic shaft
The Telescopic Multi Facet Donger has a lightweight carbon fibre telescopic shaft, a removable head and an integrated timber hardness tester.
Eradicate flying insects effortlessly with our premium selection of Glue Board Fly Traps & Electric Fly Zappers at Globe. Ideal for commercial settings such as kitchens, backrooms, and food processing facilities, these highly effective solutions offer unparalleled control over pesky flying pests.
Both Glue Board Fly Traps and Electric Fly Zappers utilise a targeted ultraviolet light wavelength to attract insects to the unit. In Electric Fly Zappers, the insect is swiftly eliminated upon contact with the electrical grid before being collected in a convenient catch tray for hassle-free removal. Meanwhile, Glue Board Fly Traps securely capture insects on a sticky adhesive board located at the back of the unit, ensuring easy and hygienic disposal. Simply shop and replace the glueboards from Globe!
Explore our extensive range of fly traps and zappers, designed for effortless installation on walls, ceilings, or as free-standing units. With discreet and high-performing solutions, you can effectively combat unwanted flying insects while maintaining a clean and sanitary environment.
Don't let flying pests compromise your clients' hygiene standards and business facilities! Shop from Globe's range of fly traps and zappers which can be installed on walls and ceilings or free standing for a discreet and high performing solution to unwanted flying insects.