PPE & Safety Equipment

TERM-seal Sealant Active is designed for use in joints and cracks of all types to protect buildings and other structures from entry by termites. Used by itself for construction joints & saw cuts, it also compliments other TERM-seal products as a bonding agent for concrete, timber, and masonry, sealing penetration collars to pipes, repairs, and joints.

TERM-seal Ura-Fen Shield TWB is termite and waterproofing barrier for all building situations. It is a triple layer sheet barrier used to form a continuous moisture proof and termite resistant barrier around the cavity perimeter and construction joints of new slab-on-ground structures. Use as a termite/damp-coarse barrier combination for installation across cavities, or as a termite/vapour barrier combination for full under-slab installation.

Tensorgrip C40 is a super high tack primer/adhesive spray, designed to create a super tacky primed surface, to allow better adhesion for D/S and butyl tapes. This formulation has super aggressive tack onto difficult surfaces which would normally have issues when priming, this material also has the ability to prime polystyrene surfaces without burning the material.

GFS Nail Kit 100 Pin + 1 Fuel Cell is a professionally designed spare accessory, ideal for a wide range of actuated nail guns.

Greenzone Termite Perimeter Barrier System is a physical termite risk management measure that is flexible in nature and is classed as a chemical barrier in a non-soil matrix. It is a once only treatment that is designed to last the economical life of the building.

Hand-held fogger designed to produce a range of spray droplets, from ULV (20 microns or less) to a power-mist (50 microns and larger) for indoor and outdoor applications.

The Dyna-Fog Golden Eagle portable thermal fogger is acclaimed in the industry for its effective and economical dispensing of oil-based chemical products.

Its ultra-lightweight design and ability to produce large volumes of dense fog make the Dyna-Fog Superhawk Thermal Fogger ideal for use in both local and remote areas.

Produces a range of spray droplets, from ULV (20 microns or less) to a mist (50 microns or larger), making it highly effective for pest management and most industrial, sanitisation and janitorial applications.

Patented termite-resistant weep hole guard manufactured from bifenthrin infused plastic. Proven to deter termite entry through existing weep holes for up to 2 years as part of a termite management plan.

The Bobson Metered Aerosol Dispenser AD-270M is a fully programmable metered spray unit designed to be installed in enclosed areas to release bursts of pyrethrum spray at regular intervals to assist in flying insect control. Designed to be used with 150g metered pyrethrum and fragrance cans.

A metered spray unit designed to be installed in enclosed areas to release bursts of pyrethrum spray at regular intervals to assist in flying insect control. Designed to be used with 150g metered pyrethrum and fragrance cans. Light sensor to detect day and night.