-
Masonry Drill Bit SDSHigh quality masonry drill bits of various diameter and length to suit your application.
-
GFS 1000 Concrete & Steel TRAK Nailing GunGFS1000 Concrete & Steel TRAK nailing gun is ideal for installing termite barriers during pre-construction, smooth edge, electrical & data clips, channel & track, steel stud to block and concrete walls, and timber battens to concrete and block walls.
-
Fipforce Dust Termiticide and Insecticide (Pack of 2 x 5g)5g/kg Fipronil
Fipforce Dust Termiticide and Insecticide contains 5g/kg of Fipronil which is toxic to insects by contact or ingestion. FipForce Dust is applied through a hand duster to help in the control of Termites, Nuisance ants and Cockroaches. It has a mineral based carrier which flows extremely well and is less susceptible to moisture than cellulose based dusts. Less moisture build-up means less clogging of the application procedure.
-
Tapered Cork 18 x 11/8mm (Pack of 1000)
A pack of 1000 tapered corks with each cork measuring 18 x 11/8mm. Each cork is made from a single piece of natural cork.
-
GFS Magnetic Adaptor for Nail Gun
Magnetic adaptor designed for use with the GFS Gas Actuated Concrete or Steel Nail Gun
-
GFS Magnetic Steel Washers for Nail Gun
A pack of 500 Magnetic Washes designed for use with the GFS 1000 Concrete & Steel Trak Nail Gun
-
Makita Nemesis 2 Masonry Drill Bit (SDS 4-Cutter)
The Makita Nemesis 2 Masonry Drill bit with 4-cutter geometry is a premium drill bit with a full carbide head for improved durability and dust removal. Available in a range of lengths and diameters.
-
Multi Facet Donger Termite Inspection Tool
Fixed length
The Multi Facet Donger (MFD) is a tool used in termite and building inspections and produces a change in tone when damage or anomalies are present. This donger has been designed to reduce the risk of missing timber damage by providing greater surface contact and covering substantially more surface area than conventional tools.
-
Multi Facet Donger with Telescopic Shaft Termite Inspection Tool
Extendable telescopic shaft
The Telescopic Multi Facet Donger has a lightweight carbon fibre telescopic shaft, a removable head and an integrated timber hardness tester.
-
Slab and Soil Injector Body with Bent Top
Bent Top
The Slab and Soil Injector Body is a stainless steel frame only and features a bent top. It is designed for use with a range of slab and soil injection extensions. No tips are included.
-
Slab and Soil Injector Body with Straight Top
Straight Top
The Slab and Soil Injector Body is a stainless steel frame only and features a straight top. It is designed for use with a range of slab and soil injection extensions. No tips are included.
-
Termatrac iTraker Base Multi-Purpose Detection Tool
Radar, Moisture & Temperature Sensor
The iTraker Base Detection Tool is a cutting-edge, non-invasive detection device, fully furnished to pinpoint the movement of insects and other pests. Integrated with user-friendly troubleshooting sensors, this device meets industry standards and requirements. As a result, it economically provides a more precise and comprehensive inspection and treatment strategy, delivered by Pest Control Operators and Building Inspectors.
Out of stock
Stay protected when applying chemicals and dealing with pests with our range of PPE and pest control safety equipment. We have a wide range of protective clothing for spraying pesticides including coveralls that provide full body protection against dust, liquids, oil, grease and more while allowing for freedom of movement. We also provide other pesticide safety equipment such as gloves that are resistant to chemicals, kneepads to protect your knees from rough surfaces, and a selection of filters and face masks for effective protection against a wide range of gases and vapours. PPE for pest control also includes keeping other people in the area safe which is why it is essential to shop our warning signs that communicate that pesticides are being sprayed in the area and what the active ingredient is.