Termite Reticulation Systems

The Altis 150mm x 50m Pre-Made External Perimeter Roll is for use with the Altis termite reticulation systems. This is a 150mm wide perforated sheet, fitted with 1 (one) run of the dripper line fixed to the sheet.

The Termstop Reticulation Kit features a chemical-resistant pressure pipe with emitter holes at regular spacings to help deliver pesticides around a treated zone or perimeter around buildings.

The TERM-seal Termite-Pro Perimeter Retreatment System can be integrated with other TERM-seal systems to provide comprehensive termite protection to both new buildings and renovations or additions to existing buildings across Australia.

The Altis 90-Degree Joiner is designed to suit Altis reticulation systems in termite management installations. This versatile 90-degree shaped provides a flexible trajectory for the dripper line to circulate around bay windows and other installation requirements. Its superior design includes sealing slip lock joints which offer a secure and easy-to-use fitting.

The Altis Square Pathway Trap is a pump-up fitting that allows the manifold pump to be concealed. This is a lockable trap and is the recommended pathway trap for use with Altis reticulation systems. It comes supplied with 2 screws and requires an Allen key to tighten.

The Altis T-Joint is a dripper line fitting for the Altis termite reticulation system. It is a suitable fitting to link the dripper line into penetrations and can be used to go around external pipes and penetrations. No additional clips are required as the blue slip lock joints provide the necessary seal.

The Altis 45 degree / 135 degree joint is a dripper line fitting suitable for routing the dripper line around bay windows. No clips are required as the slip lock joints provide the necessary seal required by the termite reticulation system.

The Altis Inline Joint is a dripper line fitting used to join two pieces of dripper line together in the Altis termite reticulation system. No clips are required as the blue slip lock joints provide the necessary seal.

The Altis Stop-End is a dripper line fitting used to on the dripper line at the end of a run of the Altis termite reticulation system. No clips are required as the blue slip lock joints provide the necessary seal.

FlowZone Quick Change 0-degree Pin Nozzle for high hard to reach areas lets you get the maximum reach out of your chosen FlowZone sprayer. 

FlowZone Quick-Connect 25° Fan Nozzle is a replacement 25-degree fan nozzle that sprays a flat fan pattern at a 25-degree angle.

Get all the spray patterns you need in one handy nozzle, this quick connect nozzle fits straight up to FlowZone models. Spray patterns include 0 deg pin, 25 deg fan, 40 deg fan and 2 soap for detergent applications.