- Termidor Foam Termiticide and Insecticide
0.05g/kg Fipronil
Termidor Foam is a robust dry foam formulation that expands to fill termite nests, galleries and other active workings.
- Kordon Collar (100 Pack)
0.5g/kg Deltamethrin
Kordon Collar is a service penetration barrier system. Kordon collars are registered for the protection of buildings and structures against subterranean termites in accordance with AS3660. Available in 2 sizes
- Kordon TMB Underslab Termite Barrier
0.5g/kg Deltamethrin
Kordon TMB is a complete underslab barrier, providing both termite and moisture protection.
- Homeguard Termite and Moisture Barrier (TMB) 4m X 50m
1g/kg Bifenthrin
HomeGuard TMB provides total termite protection for the building under slab and contains 1g/kg Bifenthrin.
- Homeguard Protectacote Primer 5L
Prepare surface with Protectacote Primer
HomeGuard Protectacote Primer is designed to be applied before HomeGuard Protectacote. Apply a single coat of the primer to run of masonry, concrete or fibre board prior to applying HomeGuard Protectacote Termite and Waterproof Barrier. All surfaces must be clean and free of grease and dirt before application.
- Homeguard Protectacote 15L
0.65g/L Bifenthrin
HomeGuard Protectacote, in conjunction with the HomeGuard Precision Termite Management System (the HomeGuard System), forms a continuous waterproof and termite resistant barrier around the perimeter of new slab-on-ground structures and extensions to existing structures.
- Homeguard Perimeter DPC White Sheeting (Damp Proof Course)
1g/kg Bifenthrin
HomeGuard DPC provides total termite protection for the building perimeters. HomeGuard DPC (Damp Proof Course) is a tough, 500 micron, embossed polymer sheeting impregnated with Bifenthrin and when used as a component of a termite management system, meet the requirements of AS 3660.1 approved in accordance with and AS 3660.3 – Termite Management.
- Homeguard PB Blue Sheeting
1g/kg Bifenthrin
HomeGuard PB provides total protection for all building perimeters from subterranean termites. HomeGuard PB is a high impact, 300 micron, embossed polymer sheeting product that is impregnated with Bifenthrin and when used as a component of a termite management system, meet the requirements of AS 3660.1 approved in accordance with and AS 3660.3 – Termite Management.
- Homeguard Granular Termiticide (GT) 27L
1g/kg Bifenthrin
HomeGuard® GT is a plastic granular material termite protection product, impregnated with Bifenthrin. HomeGuard® GT is designed to prevent concealed entry of subterranean termites through perimeter cavities and construction voids.
- Homeguard Flexi Collar
Bifenthrin
Homeguard's unique flexible collars are impregnated with bifenthrin. They physically stop attacking termites entering a structure via penetration pipes; they will also kill termites that contact the collar and repel them away from the penetration. Available in 100mm, 80mm, 50mm, 40mm, 25mm
- Homeguard Collar
Bifenthrin
Homeguard Collars are impregnated with bifenthrin. The collars physically stop attacking termites entering a structure via penetration pipes and will also kill termites that contact the collar and repel them away from the penetration. Available in 40, 50, 80 and 100 mm diameters.
- Fipforce Dust Termiticide and Insecticide
5g/kg Fipronil
Fipforce Dust Termiticide and Insecticide contains 5g/kg of Fipronil which is toxic to insects by contact or ingestion. FipForce Dust is applied through a hand duster to help in the control of Termites, Nuisance ants and Cockroaches. It has a mineral based carrier which flows extremely well and is less susceptible to moisture than cellulose based dusts. Less moisture build-up means less clogging of the application procedure.
Foaming machines for pest control are best suited for small, enclosed spaces where the insecticide foam will create a physical barrier, like down sinks and drains, in hollow tubes and wall voids. The ability of the foam to expand and fill the area means no key surfaces will be missed and any pests nesting within the space will be eliminated by using an insecticidal foam. To produce foam, you can create the necessary pressure within the foaming machine by using the handpump, or in electric foamer systems you can simply activate the compressor by following the unit's instructions. You can also use foaming agents that can be mixed with your liquid pesticide to create a shaving cream-like texture. Our insecticide foaming units are portable making them ideal for spot treatment of pesticide foam in residential and commercial areas.