-
Termifoam 1.2L Foam InjectorA mini pneumatic foamer consisting of a 1.2 litre capacity poly tank with manual hand pump, polyurethane hose and 5mm diameter stainless steel injection nozzle.
-
B&G Versafoamer HH 4L FoamerThe Versafoamer HH is an efficient foamer based on a standard B&G 3.8L tank, and is pressurised by hand.
-
B&G 220V Versafoamer 4000This complete foam delivery system is built around a small and quiet compressor, a 3.8L stainless steel tank with a pressure gauge, a 2m hose, a rugged valve with a curved application tip.
Out of stock -
PCO Non-Repellent Foaming Agent 1L
PCO Foaming Agent is formulated for use in any foaming machine expands your pesticide into a ”shaving cream” consistency. The thick foam works its way into all of those remote areas so often missed by conventional spray treatments.
-
Kordon Collar (100 Pack)
0.5g/kg Deltamethrin
Kordon Collar is a service penetration barrier system. Kordon collars are registered for the protection of buildings and structures against subterranean termites in accordance with AS3660. Available in 2 sizes
-
Kordon TMB Underslab Termite Barrier
0.5g/kg Deltamethrin
Kordon TMB is a complete underslab barrier, providing both termite and moisture protection.
-
Homeguard Termiflex Termiticidal Adhesive and Sealant
2g/kg Bifenthrin
Homeguard Termiflex Termiticidal Adhesive and Sealant is a unique sealant / builder's adhesive that has been impregnated with Biflex. Use Homeguard Termiflex to hold Homeguard sheets in place until other building elements are installed, by fastening joints and corners corners and holding the sheet to bricks, blocks, concrete and other buliding materials in the gaps between nails and other similar fastening devices.
-
Homeguard Tape Service Penetration Roll
Self-adhesive rolls for service penetration, installed above a finished slab level to indicate service penetration has been protected by Homeguard.
-
Homeguard Termite and Moisture Barrier (TMB) 4m X 50m
1g/kg Bifenthrin
HomeGuard TMB provides total termite protection for the building under slab and contains 1g/kg Bifenthrin.
-
Homeguard Protectacote Primer 5L
Prepare surface with Protectacote Primer
HomeGuard Protectacote Primer is designed to be applied before HomeGuard Protectacote. Apply a single coat of the primer to run of masonry, concrete or fibre board prior to applying HomeGuard Protectacote Termite and Waterproof Barrier. All surfaces must be clean and free of grease and dirt before application.
-
Homeguard Protectacote 15L
0.65g/L Bifenthrin
HomeGuard Protectacote, in conjunction with the HomeGuard Precision Termite Management System (the HomeGuard System), forms a continuous waterproof and termite resistant barrier around the perimeter of new slab-on-ground structures and extensions to existing structures.
-
Homeguard Perimeter DPC White Sheeting (Damp Proof Course)
1g/kg Bifenthrin
HomeGuard DPC provides total termite protection for the building perimeters. HomeGuard DPC (Damp Proof Course) is a tough, 500 micron, embossed polymer sheeting impregnated with Bifenthrin and when used as a component of a termite management system, meet the requirements of AS 3660.1 approved in accordance with and AS 3660.3 – Termite Management.
Foaming machines for pest control are best suited for small, enclosed spaces where the insecticide foam will create a physical barrier, like down sinks and drains, in hollow tubes and wall voids. The ability of the foam to expand and fill the area means no key surfaces will be missed and any pests nesting within the space will be eliminated by using an insecticidal foam. To produce foam, you can create the necessary pressure within the foaming machine by using the handpump, or in electric foamer systems you can simply activate the compressor by following the unit's instructions. You can also use foaming agents that can be mixed with your liquid pesticide to create a shaving cream-like texture. Our insecticide foaming units are portable making them ideal for spot treatment of pesticide foam in residential and commercial areas.