Sprayer Spare Parts & Maintenance

Kordon Collar is a service penetration barrier system. Kordon collars are registered for the protection of buildings and structures against subterranean termites in accordance with AS3660. Available in 2 sizes

Kordon TMB is a complete underslab barrier, providing both termite and moisture protection.

Cardboard glue trap that captures mice and insects. Can be placed flat against walls or corners. In dusty areas, the board can be folded into a covered glue trap. Approx 203mm x 101mm.

TRAPPER Monitor & Insect Trap is a non-poisonous glue trap that captures and monitors insects. PMPs can use it to accurately determine the location, species and severity of insect infestations.

Glueboard for mice and insects to suit Protector Pest Monitor Station and Trapper multi-catch mouse trap. 165mm x 100mm.

Glue trap for mice and insects. Trapper MAX has more than 40% larger surface area than the TRAPPER LTD. Pre baited glue formulation.Trapper MAX can be used as a flat trap or folded into a covered trap. 195mm x 135mm.

Homeguard Termiflex Termiticidal Adhesive and Sealant is a unique sealant / builder's adhesive that has been impregnated with Biflex. Use Homeguard Termiflex to hold Homeguard sheets in place until other building elements are installed, by fastening joints and corners corners and holding the sheet to bricks, blocks, concrete and other buliding materials in the gaps between nails and other similar fastening devices.

Self-adhesive rolls for service penetration, installed above a finished slab level to indicate service penetration has been protected by Homeguard.

HomeGuard TMB provides total termite protection for the building under slab and contains 1g/kg Bifenthrin.

HomeGuard Protectacote Primer is designed to be applied before HomeGuard Protectacote. Apply a single coat of the primer to run of masonry, concrete or fibre board prior to applying HomeGuard Protectacote Termite and Waterproof Barrier. All surfaces must be clean and free of grease and dirt before application.

HomeGuard Protectacote, in conjunction with the HomeGuard Precision Termite Management System (the HomeGuard System), forms a continuous waterproof and termite resistant barrier around the perimeter of new slab-on-ground structures and extensions to existing structures.

HomeGuard DPC provides total termite protection for the building perimeters. HomeGuard DPC (Damp Proof Course) is a tough, 500 micron, embossed polymer sheeting impregnated with Bifenthrin and when used as a component of a termite management system, meet the requirements of AS 3660.1 approved in accordance with and AS 3660.3 – Termite Management.