Building Inspection Equipment

The Tramex Moisture Encounter 5 (ME5) is a dual-depth, non-destructive moisture meter for instant moisture measurement and evaluation.

The Multi Facet Donger (MFD) is a tool used in termite and building inspections and produces a change in tone when damage or anomalies are present. This donger has been designed to reduce the risk of missing timber damage by providing greater surface contact and covering substantially more surface area than conventional tools.

The Telescopic Multi Facet Donger has a lightweight carbon fibre telescopic shaft, a removable head and an integrated timber hardness tester.

The Sundstrom SR900 Respirator Basic Kit 217 is a complete ready-to-go half face respirator with filters in a convenient plastic storage box.

Blue Nitrile Gloves provide outstanding resistance to many commonly used chemicals, and are more resistant to puncturing. Disposable, powder free nitrile gloves ideal for domestic, chemical and general purpose use.

A pair of single-dipped PVC gloves with a cotton interlock liner. These gloves are 45cm in length and designed to reach elbow length to provide protection against oil, grease and chemicals.

Standard sized bird posts for bird wire systems to protect against pigeons. Wire is suspended between bird wire posts to prevent large birds from landing. Install these bird posts by knocking them into Anchor Rivets. These posts need to be positioned at 1.5m intervals along the ledge. These posts are used for the lead. These posts will be supplied in packs of 100.

Standard sized bird posts for bird wire systems to protect against pigeons. Wire is suspended between bird wire posts to prevent large birds from landing. These bird posts are designed to be inserted into Stick-on bases. Use these posts when multiple rows of bird wire is needed.

Larger sized bird posts for bird wire systems to protect against pigeons. Wire is suspended between bird wire posts to prevent large birds from landing. These bird posts are designed to be installed by knocking them into Anchor Rivets. Use these posts when multiple rows of bird wire is needed.

Standard sized bird posts for Bird wire systems to protect against pigeons. Wire is suspended between bird wire posts to prevent large birds from landing. The posts are designed to be inserted into Stick-on Bases. These posts are designed for the leading edge of a ledge. The bird post is 4mm diameter and is made with stainless steel.

Stainless steel bird posts are designed for use as part of a bird wire and post system to deter landing from feral pigeons.

The Makita 18V Hammer Driver Drill Kit with 3.0Ah Battery and Charger is a brushless and cordless combo kit that includes 2x 3.0Ah Lithium ion batteries, optimum charger & carry case.