Search results for: 'duster for pipe control'

Greenzone Sock Barriers are pipe collars specifically designed to be used on pipe penetrations to protect termite entry due to concrete expansion. Available in 40mm, 50mm, 80mm and 100mm to suit different pipe sizes.

Fipforce Dust Termiticide and Insecticide contains 5g/kg of Fipronil which is toxic to insects by contact or ingestion. FipForce Dust is applied through a hand duster to help in the control of Termites, Nuisance ants and Cockroaches. It has a mineral based carrier which flows extremely well and is less susceptible to moisture than cellulose based dusts. Less moisture build-up means less clogging of the application procedure.

The B&G 1150 Bulb Dust-R Insecticide Dust Applicator comes with 2 different sized tips to choose from when you apply insecticide dust in crevices and cracks.

TERM-seal soft annular collars are used to protect slab penetrations and prevent the entry of Termites. These collars are supplied pre-cut to fit 40mm (water), 40mm (elect), 50mm, 65mm, 80mm, and 100mm pipe and conduit sizes.

The Termstop Reticulation Kit features a chemical-resistant pressure pipe with emitter holes at regular spacings to help deliver pesticides around a treated zone or perimeter around buildings.

Bird Free Zip Tie Bases allow the gels to be securely fixed to almost any surface. They are the perfect solution for pipe work, tree branches, wire and cables and any other situation that is not flat.

The Altis T-Joint is a dripper line fitting for the Altis termite reticulation system. It is a suitable fitting to link the dripper line into penetrations and can be used to go around external pipes and penetrations. No additional clips are required as the blue slip lock joints provide the necessary seal.

The new PROTECTA® EVO® TUNNEL™ is an economical and versatile way to protect traps. PROTECTA EVO TUNNEL can be used indoors or outdoors, and can be secured to fences or pipes via cable ties in both the vertical and horizontal position.

TERM-seal Penetration Collars provide a termite and moisture-proof seal where concrete slabs have been penetrated to accommodate services. Available to fit diameters 40, 50, 65, 80 and 100mm pipes, TERM-seal Penetration Collars are installed in conjunction with TERM-seal Sealant Active to seal off concealed access for termites.

Shower Head Wand to suit Spraying Systems Guns provides a wide angle, shower head spreading setting.

Homeguard Collars are impregnated with bifenthrin. The collars physically stop attacking termites entering a structure via penetration pipes and will also kill termites that contact the collar and repel them away from the penetration. Available in 40, 50, 80 and 100 mm diameters.

TERM-seal Sealant Active is designed for use in joints and cracks of all types to protect buildings and other structures from entry by termites. Used by itself for construction joints & saw cuts, it also compliments other TERM-seal products as a bonding agent for concrete, timber, and masonry, sealing penetration collars to pipes, repairs, and joints.