Search results for: 'slab solo injector blue brown to'

The Altis Inline Joint is a dripper line fitting used to join two pieces of dripper line together in the Altis termite reticulation system. No clips are required as the blue slip lock joints provide the necessary seal.

The Altis Stop-End is a dripper line fitting used to on the dripper line at the end of a run of the Altis termite reticulation system. No clips are required as the blue slip lock joints provide the necessary seal.

The Altis T-Joint is a dripper line fitting for the Altis termite reticulation system. It is a suitable fitting to link the dripper line into penetrations and can be used to go around external pipes and penetrations. No additional clips are required as the blue slip lock joints provide the necessary seal.

HomeGuard TMB provides total termite protection for the building under slab and contains 1g/kg Bifenthrin.

Homeguard Termiflex Termiticidal Adhesive and Sealant is a unique sealant / builder's adhesive that has been impregnated with Biflex. Use Homeguard Termiflex to hold Homeguard sheets in place until other building elements are installed, by fastening joints and corners corners and holding the sheet to bricks, blocks, concrete and other buliding materials in the gaps between nails and other similar fastening devices.

Blue Nitrile Gloves provide outstanding resistance to many commonly used chemicals, and are more resistant to puncturing. Disposable, powder free nitrile gloves ideal for domestic, chemical and general purpose use.

TERM-seal Ura-Fen Shield TWB is termite and waterproofing barrier for all building situations. It is a triple layer sheet barrier used to form a continuous moisture proof and termite resistant barrier around the cavity perimeter and construction joints of new slab-on-ground structures. Use as a termite/damp-coarse barrier combination for installation across cavities, or as a termite/vapour barrier combination for full under-slab installation.

TermStopTermite collars are injection molded “collars” designed to deter concealed termite entry to structures via the shrinkage crack formed between the concrete slab and pipe penetrations.

Self-adhesive rolls for service penetration, installed above a finished slab level to indicate service penetration has been protected by Homeguard.

TERM-seal Penetration Collars provide a termite and moisture-proof seal where concrete slabs have been penetrated to accommodate services. Available to fit diameters 40, 50, 65, 80 and 100mm pipes, TERM-seal Penetration Collars are installed in conjunction with TERM-seal Sealant Active to seal off concealed access for termites.

TERM-seal soft annular collars are used to protect slab penetrations and prevent the entry of Termites. These collars are supplied pre-cut to fit 40mm (water), 40mm (elect), 50mm, 65mm, 80mm, and 100mm pipe and conduit sizes.

Maximise your termite protection with the cutting-edge Termidor High Pressure Device (HPD). The Termidor High Pressure Device is specifically designed to be used for applications of Termidor HE by allowing for hole spacings of up to 600mm, ensuring the same unparalleled coverage with fewer drill points.

Developed in collaboration with BASF, the Termidor High Pressure Device operates at a minimum pressure of 800psi, harnessing the power of Termidor HE's patented Advanced Polymer Technology™. This synergy between Termidor HE and the high-pressure device offers pest control professionals a revolutionary way to apply termite treatments, reducing the number of holes needed and minimising disruption to structures.