Search results for: 'slab solubl injector black band to'

TERM-seal Multi-Purpose Active is a highly engineered, acrylic polymer-based liquid which upon curing forms a seamless, flexible, termite resistant and waterproof membrane. TERM-seal Multi-Purpose Active is applied by brush, roller or heavy-duty airless spray gun, applications include wall backfills, internal walls, internal wet areas, construction joints, step downs & cavities.

This is a 1m Zip that is installed directly on to bird netting to gain access to appliances such as light fixtures, AC/HVAC units, sprinklers etc.

TERM-seal Ura-Fen Shield TWB is termite and waterproofing barrier for all building situations. It is a triple layer sheet barrier used to form a continuous moisture proof and termite resistant barrier around the cavity perimeter and construction joints of new slab-on-ground structures. Use as a termite/damp-coarse barrier combination for installation across cavities, or as a termite/vapour barrier combination for full under-slab installation.

TermStopTermite collars are injection molded “collars” designed to deter concealed termite entry to structures via the shrinkage crack formed between the concrete slab and pipe penetrations.

Avishock Screw-In Wire Guides are used for securing lead wire. Easily installed using a self-tap screw, these guides are ideal for installations on stone.

Self-adhesive rolls for service penetration, installed above a finished slab level to indicate service penetration has been protected by Homeguard.

TERM-seal Penetration Collars provide a termite and moisture-proof seal where concrete slabs have been penetrated to accommodate services. Available to fit diameters 40, 50, 65, 80 and 100mm pipes, TERM-seal Penetration Collars are installed in conjunction with TERM-seal Sealant Active to seal off concealed access for termites.

The Protecta EVO Ambush is a rodent bait station designed to fit near to the ground, setting it up for the perfect surprise attacks in tight rodent baiting situations. Despite its low profile, the EVO Ambush still allows room for the Trapper T-REX™ rat trap, for times when trapping is a necessary step in the integrated rodent management program.

The Killgerm AF Insect and Cockroach Monitoring Glue Trap is a highly effective tool designed to monitor insect activity with precision. Part of Killgerm’s innovative AF Range, this trap features a 360-degree access system with specially designed entry ramps that guide insects directly into the trap from any angle. This efficient approach makes the Killgerm AF trap a top choice for pest control professionals seeking thorough insect monitoring.

TERM-seal soft annular collars are used to protect slab penetrations and prevent the entry of Termites. These collars are supplied pre-cut to fit 40mm (water), 40mm (elect), 50mm, 65mm, 80mm, and 100mm pipe and conduit sizes.

Maximise your termite protection with the cutting-edge Termidor High Pressure Device (HPD). The Termidor High Pressure Device is specifically designed to be used for applications of Termidor HE by allowing for hole spacings of up to 600mm, ensuring the same unparalleled coverage with fewer drill points.

Developed in collaboration with BASF, the Termidor High Pressure Device operates at a minimum pressure of 800psi, harnessing the power of Termidor HE's patented Advanced Polymer Technology™. This synergy between Termidor HE and the high-pressure device offers pest control professionals a revolutionary way to apply termite treatments, reducing the number of holes needed and minimising disruption to structures.

HomeGuard Protectacote, in conjunction with the HomeGuard Precision Termite Management System (the HomeGuard System), forms a continuous waterproof and termite resistant barrier around the perimeter of new slab-on-ground structures and extensions to existing structures.