Termite Detection & Application Equipment
- Multi Facet Donger Termite Inspection Tool
Fixed length
The Multi Facet Donger (MFD) is a tool used in termite and building inspections and produces a change in tone when damage or anomalies are present. This donger has been designed to reduce the risk of missing timber damage by providing greater surface contact and covering substantially more surface area than conventional tools.
- Multi Facet Donger with Telescopic Shaft Termite Inspection Tool
Extendable telescopic shaft
The Telescopic Multi Facet Donger has a lightweight carbon fibre telescopic shaft, a removable head and an integrated timber hardness tester.
- GFS Nail Kit 100 Pin + 1 Fuel Cell
GFS Nail Kit 100 Pin + 1 Fuel Cell is a professionally designed spare accessory, ideal for a wide range of actuated nail guns.
- Tramex Moisture Encounter 5 (ME5) Meter
The Tramex Moisture Encounter 5 (ME5) is a dual-depth, non-destructive moisture meter for instant moisture measurement and evaluation.
- Notice for 'New Construction - Termite Management System' (Pack of 10)
Pack of 10 Notices
A templated sign and notice record for the installation of a Termite Management System during for new construction.
- Notice for 'Existing Construction - Termite Management System' (Pack of 10)
Pack of 10 Notices
A templated sign and notice record for the installation of a Termite Management System in an existing structure (post-construction).
- Kordon Collar (100 Pack)
0.5g/kg Deltamethrin
Kordon Collar is a service penetration barrier system. Kordon collars are registered for the protection of buildings and structures against subterranean termites in accordance with AS3660. Available in 2 sizes
- Kordon TMB Underslab Termite Barrier
0.5g/kg Deltamethrin
Kordon TMB is a complete underslab barrier, providing both termite and moisture protection.
- Homeguard Termiflex Termiticidal Adhesive and Sealant
2g/kg Bifenthrin
Homeguard Termiflex Termiticidal Adhesive and Sealant is a unique sealant / builder's adhesive that has been impregnated with Biflex. Use Homeguard Termiflex to hold Homeguard sheets in place until other building elements are installed, by fastening joints and corners corners and holding the sheet to bricks, blocks, concrete and other buliding materials in the gaps between nails and other similar fastening devices.
- Homeguard Tape Service Penetration Roll
Self-adhesive rolls for service penetration, installed above a finished slab level to indicate service penetration has been protected by Homeguard.
- Homeguard Termite and Moisture Barrier (TMB) 4m X 50m
1g/kg Bifenthrin
HomeGuard TMB provides total termite protection for the building under slab and contains 1g/kg Bifenthrin.
- Homeguard Protectacote Primer 5L
Prepare surface with Protectacote Primer
HomeGuard Protectacote Primer is designed to be applied before HomeGuard Protectacote. Apply a single coat of the primer to run of masonry, concrete or fibre board prior to applying HomeGuard Protectacote Termite and Waterproof Barrier. All surfaces must be clean and free of grease and dirt before application.
Equip yourself with the best tools of the trade with our termite detection and application equipment. Our termite inspection tools include termite dongers, termite moisture meters, infrared cameras and headlamps to help you detect termite activity more efficiently. Once termite damage is identified, our application equipment such as injector rods, spray tips and concrete seals will enable you to apply termiticides and and keep termite populations under control.